The photo demonstrate a 6 pole product
The photo demonstrate a 6 pole product
The photo demonstrate a 6 pole product
General information
Short description
Barrier terminal blocks, Screw connection
Long description
Barrier terminal blocks, screw connection, Pitch : 7.62mm, M3, 250V, 6A
Connection method
Screw connection
Soldering method
Wave Soldering
Length (mm)
7.62*(P-1)+8.84
Pin demensions (Thickness x Width)(mm)
0.8x1.0
PCB hole diameter (mm)
1.6~1.7
Material information
Insulation material group
IIIa
Flame retardant rating , compliant with UL94
V0
Insulation resistance
≥1000MΩ at DC 500V
Conductor material
COPPER ALLOY
Plating of conductor surface
Tin PLATED
Connection data-IEC
Rated voltage (II/2)(V)
400
Rated voltage (III/2) (V)
320
Rated voltage (III/3)(V)
250
Rated impulse voltage (II/2)(KV)
4
Rated impulse voltage (III/2)(KV)
4
Rated impulse voltage (III/3)(KV)
4
Conductor cross section solid. min (mm²)
0.2
Conductor cross section solid.max (mm²)
1.5
Conductor cross section stranded. min (mm²)
0.2
Conductor cross section stranded. max (mm²)
1.5
2 conductors with same cross section, solid, max (mm²)
1
2 conductors with same cross section, stranded, max (mm²)
1
Slotted screwdriver size (Blade thickness x Width)(mm)
0.8x4.0
Philips screwdriver size
PH2
Recommend tightening torque. min (N.m)
0.5
Recommend tightening torque. max (N.m)
0.8
Stripping Length (mm)
8~9
Connection data-UL
Rated voltage (UL/CUL Group B)(V)
250
Rated current (UL/CUL Group B)(A)
6
Min. solid wire connection (AWG) acc. to UL/CUL
24
Max. solid wire connection AWG acc. to UL/CUL
16
Min. stranded wire connection AWG acc. to UL/CUL
24
Max. stranded wire connection AWG acc. to UL/CUL
16
Environment & Safety
Back of the hand protection (YES or NO)
YES
Operating temperature. max (°C)
120
Operating temperature. min (°C)
-40
DS-201
Insertion bridge
For pitch is 7.62mm of barrier terminal blocks. Material is brass. Rated current 15A.
Add
The web catalog is for reference only. Dinkle remains the right of product modification and engineering change of the design. The final product is made according to engineering drawing.