The photo demonstrate a 6 pole product
The photo demonstrate a 6 pole product
The photo demonstrate a 6 pole product
General information
Short description
Barrier terminal blocks , Screw connection
Long description
Barrier terminal blocks , Screw connection , Pitch : 8.5mm , M3 , 300V , 20A
Category
Panel Feed Through Terminal Blocks
Connection method
Screw connection
Type of locking
With mounting flange
Material information
Insulation material group
IIIa
Flame retardant rating , compliant with UL94
V0
Conductor material
Copper Alloy
Plating of conductor surface
Tinned
Connection data-IEC
Rated voltage (II/2)(V)
630
Rated voltage (III/2) (V)
600
Rated voltage (III/3)(V)
400
Rated impulse voltage (II/2)(KV)
6
Rated impulse voltage (III/2)(KV)
6
Rated impulse voltage (III/3)(KV)
6
Conductor cross section solid. min (mm²)
0.34
Conductor cross section solid.max (mm²)
4
Conductor cross section stranded. min (mm²)
0.34
Conductor cross section stranded. max (mm²)
4
2 conductors with same cross section, solid, max (mm²)
4
2 conductors with same cross section, stranded, max (mm²)
4
Slotted screwdriver size (Blade thickness x Width)(mm)
0.8x4.0
Philips screwdriver size
PH2
Recommend tightening torque. min (N.m)
0.5
Recommend tightening torque. max (N.m)
1
Stripping Length (mm)
8~9
Connection data-UL
Rated voltage (UL/CUL Group B)(V)
300
Rated current (UL/CUL Group B)(A)
20
Min. solid wire connection (AWG) acc. to UL/CUL
22
Max. solid wire connection AWG acc. to UL/CUL
12
Min. stranded wire connection AWG acc. to UL/CUL
22
Max. stranded wire connection AWG acc. to UL/CUL
12
Environment & Safety
Back of the hand protection (YES or NO)
YES
Operating temperature. max (°C)
130
Operating temperature. min (°C)
-40
UL Recognized
Wire Range (Group B)(AWG)
22~12
Rated voltage (Group B)(V)
300
Rated current (Group B)(A)
20
CUL Recognized
Wire Range (Group B)(AWG)
22~12
Rated voltage (Group B)(V)
300
Rated current (Group B)(A)
20
The web catalog is for reference only. Dinkle remains the right of product modification and engineering change of the design. The final product is made according to engineering drawing.