General information
Short description
PCB Terminal Blocks, Push-in Design
Long description
PCB Terminal Blocks, Push-in Design, Pitch :5.00mm, 300V, 10A
Category
PCB Terminal Blocks
Connection method
Push-in Design
Soldering method
Reflow Soldering
Length (mm)
5.00*(P-1)+4.2
Pin demensions (Thickness x Width)(mm)
0.35x0.8
Number of positions
02P~08P
Material information
Insulation material
HIGH-TEMPERATURE PLASTICS
Insulation material group
IIIa
Flame retardant rating , compliant with UL94
V0
Insulation resistance
≥500MΩ at DC 500V
Conductor material
COPPER ALLOY
Plating of conductor surface
Tin PLATED
Connection data-IEC
Rated voltage (II/2)(V)
400
Rated voltage (III/2) (V)
320
Rated voltage (III/3)(V)
250
Rated impulse voltage (II/2)(KV)
4
Rated impulse voltage (III/2)(KV)
4
Rated impulse voltage (III/3)(KV)
4
Conductor cross section solid. min (mm²)
0.2
Conductor cross section solid.max (mm²)
1.5
Conductor cross section stranded. min (mm²)
0.2
Conductor cross section stranded. max (mm²)
1.5
Conductor cross section flexible, with min ferrule without plastic sleeve (mm²)
0.25
Conductor cross section flexible, with max ferrule without plastic sleeve (mm²)
1
Conductor cross section flexible, with min ferrule with plastic sleeve (mm²)
0.25
Conductor cross section flexible, with max ferrule with plastic sleeve (mm²)
1
Slotted screwdriver size (Blade thickness x Width)(mm)
0.8X4
Stripping Length (mm)
8~9
Connection data-UL
Rated voltage (UL/CUL Group B)(V)
300
Rated current (UL/CUL Group B)(A)
10
Rated voltage (UL/CUL Group D)(V)
300
Rated current (UL/CUL Group D)(A)
10
Min. solid wire connection (AWG) acc. to UL/CUL
28
Max. solid wire connection AWG acc. to UL/CUL
16
Min. stranded wire connection AWG acc. to UL/CUL
28
Max. stranded wire connection AWG acc. to UL/CUL
16
Environment & Safety
Finger protection (YES or NO)
YES
Operating temperature. max (°C)
120
Operating temperature. min (°C)
-40
The web catalog is for reference only. Dinkle remains the right of product modification and engineering change of the design. The final product is made according to engineering drawing.