General information
Material information
Connection data-IEC
Connection data-UL
Environment & Safety
-
General information
- Short description
- Fuse Terminal Block, Push-in Design
- Long description
- Fuse Terminal Block, Push-in Design, Width :6.2mm, 300V, 10A
- Category
- Fuse Terminal Block
- Color
- Beige (default)
- Connection method
- Spring Clamp Connection
- Length (mm)
- 60.8
- Width (mm)
- 6.2
- Height (mm)
- 83.2 84.7（TS-35N）/ 92.2（TS-35/15N）
- Level
- Single level
- Connection points
- 2
-
Material information
- Insulation material
- PA
- Insulation material group
- I
- Flame retardant rating , compliant with UL94
- V0
- Insulation resistance
- ≧500MΩ at DC 500V
-
Connection data-IEC
- Rated voltage (V)
- 400
- Rated current (A)
- 6.3
- Rated voltage (III/3)(V)
- 400
- Rated impulse voltage (III/3)(KV)
- 4
- Conductor cross section solid. min (mm²)
- 0.2
- Conductor cross section solid.max (mm²)
- 2.5
- Conductor cross section stranded. min (mm²)
- 0.2
- Conductor cross section stranded. max (mm²)
- 2.5
- Conductor cross section flexible, with min ferrule without plastic sleeve (mm²)
- 0.25
- Conductor cross section flexible, with max ferrule without plastic sleeve (mm²)
- 2.5
- Conductor cross section flexible, with min ferrule with plastic sleeve (mm²)
- 0.25
- Conductor cross section flexible, with max ferrule with plastic sleeve (mm²)
- 2.5
- 2 conductors with same cross section flexible, min twin ferrules with plastic sleeve (mm²)
- 0.5
- 2 conductors with same cross section flexible, max twin ferrules with plastic sleeve (mm²)
- 1
- Slotted screwdriver size (Blade thickness x Width)(mm)
- 0.6x3.5
- Stripping Length (mm)
- 10~11
- Mounting rail
- TS-35N、TS-35/15N
- End cover plate required
- YES
- Grounding connections
- NO
-
Connection data-UL
- Rated voltage (UL/CUL Group B)(V)
- 300
- Rated current (UL/CUL Group B)(A)
- 10
- Min. solid wire connection (AWG) acc. to UL/CUL
- 28
- Max. solid wire connection AWG acc. to UL/CUL
- 12
- Min. stranded wire connection AWG acc. to UL/CUL
- 28
- Max. stranded wire connection AWG acc. to UL/CUL
- 12
-
Environment & Safety
- Back of the hand protection (YES or NO)
- YES
- Finger protection (YES or NO)
- YES
- Operating temperature. max (°C)
- 120
- Operating temperature. min (°C)
- -40
-
TM42W
Marking Label For
BEST APPLICATION：
DP2.5N Series, DPH2.5, DPH2.5-PE, DP2.5N-3L-SPE, AK2.5 Series, DPP2.5N Series, DP2.5N-3L, DP2.5N-3L-PV, DP2.5N-3L-L3PE, DP2.5N-3L-PE, DK2.5S, DK1.5SG Series, PM2.5N-XXP, PM2.5WN-XXP, PMM2.5WN-XXP, AKK2.5, AKK2.5-PV, AKK2.5-PE, AKK2.5-D Series
AVAILABLE APPLICATION：
DPES2.5, DPES2.5-PE, DP2.5PG, DP2.5SG Series
White color.
Using UL94-V0 class of insulation material. - Add
-
TM47W
Marking Label For
BEST APPLICATION：
DP2.5N Series, DPH2.5, DPH2.5-PE, DP2.5N-3L-SPE, AK2.5 Series, DK2.5N Series, DKK2.5N Series, DK2.5N-3L Series
AVAILABLE APPLICATION：
DKES1.5, DK2.5-PE
White color.
Using UL94-V0 class of insulation material. - Add
-
DSD01-2.5XXN
Plug-in bridge For DP2.5N Series, DPP2.5N Series, DP2.5N-3L Series, DP2.5SG Series, DPES2.5, DPES2.5-PE,
DKD10-P001, DPHD10-P001, DPH2.5, DPH2.5-PE, DPD16-P001, DPD10-P001,
AK2.5 Series, AKK2.5, AKK2.5-D01, AKK2.5-D02, AKK2.5-D03, AKK2.5-D04, AKK2.5-PV
Red color.
Using UL94-V0 class of insulation material. - Add
-
AK2.5C-TN
End Cover For AK2.5-TN
Beige color.
Using UL94-V0 class of insulation material. - Add
-
SS2N
End Bracket For TS-35, TS-35/15 rails.
Beige color.
Using UL94-V0 class of insulation material. - Add
-
SS5N
End Bracket For TS-35, TS-35/15 rails.
Beige color.
Using UL94-V0 class of insulation material. - Add
-
SS13
End Bracket For TS-35, TS-35/15 rails.
Beige color.
Using UL94-V0 class of insulation material. - Add
-
TM-R100
Continuous Flat Marking Labels - Add
-
TM-R200
Continuous Flat Marking Labels - Add
-
DSD06-2.5XXXT
Plug-in bridge For DP2.5N Series, DPP2.5N Series, DP2.5N-3L Series, DP2.5SG Series, DPES2.5 Series, DPH2.5, DPH2.5-PE, DPD10-P001, DKD10-P001, DPHD10-P001, DPD16-P001, AK2.5 Series, AKK2.5 Series
Red color.
Using UL94-V0 class of insulation material. - Add
The web catalog is for reference only. Dinkle remains the right of product modification and engineering change of the design. The final product is made according to engineering drawing.
